STASHED - SPACERAIL ONE - WALL MOUNTED AND HOOKS

Where your best bike lives, with your kit alongside it.

SpaceRail ONE & Hooks is the complete wall mounted bike storage station: the SpaceRail ONE unit plus the UnderRail bracket and a ready-picked set of hooks, so bike, helmet, shoes and sunglasses live together on one footprint. Designed and made in Britain.

Wall mounted means it fixes straight to the wall and stays where you put it. Fixings for timber and blockwork are in the box. If you would rather set the height whenever you like, and keep adding kit above and below the bike, look at the rail mounted sets.

FEATURES

• Designed and made in Britain
• Patented design, backed by a 5-year warranty
• Frame Mould Technology: a paint-safe 90° V-channel with 15mm dense foam that cradles the frame
• Endlessly customisable: 3 integrated LodeStar slots per side panel accept Type A fittings and attachments
• 2mm laser-cut and folded S275 steel, rated to 20kg max load
• Bike held front and centre, 300mm off the wall, hung by the top tube
• Everything on one unit, bike on the station and kit on the hooks below
• UnderRail bracket adds LodeStar attachment points under the shelf
• Includes sunglasses hook, shoe hook and multihook

TECH SPECS

• Suits a single road or gravel bike with a level or lightly sloped top tube, hung by the top tube
• 90° V-channel contact point covered with soft, dense 15mm foam
• Max load 20kg
• Shelf-down or shelf-up assembly
• 3 integrated diagonal LodeStar slots per side panel; accept Type A fittings and all single-point LodeStar attachments
• Recommended shelf height between 1m and 2m from floor
• Mounts direct to vertical surface via 4 x LodeStar Type C screw caps; 40mm wood screws and wall plugs supplied (wood/blockwork)
• Fixing centres 300mm (w) x 100mm (h)
• Bike held 300mm from wall surface
• Max handlebar width 580mm; longer bars can be turned slightly
• Materials: 2mm laser-cut and folded S275 mild steel, textured matt black powder coat, stainless steel fasteners, 45kg/m³ polyethylene foam pad
• Suitable for internal mounting only

STASHED - SPACERAIL ONE - WALL MOUNTED AND HOOKS

SPACERAIL ONE FAQ

CAN I HANG ANY BIKE?
SpaceRail ONE works best with road and gravel bikes with a level or slightly sloped top tube.

WHAT IS THE WEIGHT LIMIT?
The max capacity of SpaceRail ONE is 20kg, including your bike and any kit items loaded on.

HOW IS IT BETTER THAN THE OTHERS?
SpaceRail ONE is made in the UK from premium materials, and it combines with the LodeStar system, so you can customise your bike station setup to suit your specific kit.

WHAT DOES THE FOAM DO?
The foam is there to protect your precious paintwork, and helps to hold the frame level when hung.

WHICH LODESTAR HOOKS CAN I USE ON IT?

All single fitting LodeStar attachments fit on the sides, meaning double fitting attachments such as the double wheel hook, charge station and accessory trays won't fit.

The Cleat Hanger and bottle holders do not fit on the UnderRail.

WHAT DOES THE UNDERRAIL DO?
The UnderRail increases the LodeStar capacity of SpaceRail ONE. It works best with sunglasses holders, shoe hooks, computer mounts and angled hooks. You may need to orientate some attachments downwards to be clear of the shelf.

WHAT DOES THE WHEELSTRAP DO?
The Restrap WheelStrap helps to keep your bike stable on SpaceRail ONE by keeping the front wheel and handlebars in line with the frame.

INSTALLATION

WHAT HEIGHT SHOULD I FIT IT ON THE WALL?
We recommend installing SpaceRail ONE so that the shelf sits between 1 and 2 metres from the floor. The rest is down to personal preference, but be mindful of how it might interact with people in high traffic areas, especially if installed at eye level.

WHAT FIXINGS ARE SUPPLIED?
Wall Mount – 4 screw plates with 8 x 40mm screws and wall plugs.

LodeStar Mount – 4 sets of Type A rail fittings. These fit to LodeStar Rails and Boards.

WHAT'S THE DIFFERENCE BETWEEN SHELF UP AND SHELF DOWN?
Structurally there's no difference, it's just down to your visual preference.

WHAT TOOLS DO I NEED TO ASSEMBLE IT?
A 4mm allen key and a 10mm spanner or socket. For wall fixing you would also need a T25 Torx bit, an impact driver, a power drill, a 7mm masonry bit, a spirit level, a tape measure and a stud finder.

CAN I UPGRADE THE WALL MOUNT VERSION TO WORK WITH LODESTAR RAILS?
Yes, simply purchase 4 x Type A LodeStar fittings.