ENVE - SES DISC PRO / SES 100 PRO TIME TRIAL WHEELS

The SES Disc PRO and SES 100 PRO wheels were developed over the course of a full year in close partnership with the UAE Team Emirates-XRG. Every performance metric - aerodynamics, weight, stability, and rolling efficiency - was pushed to the absolute limit to maximize aerodynamic efficiency and rolling performance under real-world race conditions. This level of collaboration allows us to create products that simply wouldn’t be possible otherwise.

SES DISC PRO

Building upon the proven aerodynamics of previous-generation SES Disc wheels, the new Disc PRO reduces weight by 200 grams while improving rolling efficiency and stability through an increase in width and shaping. Optimized for the critical yaw angles seen in time trials and triathlon, it delivers the Real-World Fast performance ENVE is known for—now even lighter and faster.

• 1,030g with valve and tape
• 22mm Internal Rim Width
• Aero optimized for 28mm tires
• INNERDRIVE PRO Rear Hub Internals
• ENVE PRO Ceramic Bearings
• Tubeless compatible tyres only

SES 100 PRO

Deep, fast, and uncompromising. The 100mm-deep SES 100 PRO is a no-holds-barred speed weapon. Already proven World Tour time trials and Ironman victories, this front wheel is engineered to deliver maximum aerodynamic advantage on the right courses - while maintaining the stability and confidence required at the highest speeds.

• 780 Grams with valve and tape
• 22mm Internal Rim Width
• Aero optimized for 28mm tires
• INNERDRIVE PRO Hub
• ENVE PRO Ceramic Bearings
• Tubeless compatible tyres only

AERODYNAMIC PERFORMANCE

Compared to the original SES rear disc wheel, the SES Disc PRO has been aerodynamically tuned for 28 mm tires. To achieve improved aerodynamics for larger tires, the rim was made wider throughout, but its width is limited by constraints related to derailleur and frame clearances. The result is a roughly 0.69-watt advantage over the original ENVE rear disc wheel.

ENVE’s aero development is focused on the Real-World Fast mantra. In practice, this means attempting to mimic the real-world scenario in the static environment of the tunnel. This is accomplished by developing rim shapes and testing them in a bike frame, with a rider. Time and time again, our data has highlighted why it is important to develop aerodynamic products with a pedaling rider as part of the equation.

If testing were limited to “bike only”, one could argue that there is not enough of an aero advantage with the 100mm deep front wheel to justify the added weight and side-forces. However, when a rider is added to the equation, testing data reveals that the additional depth has a significant positive downstream effect, allowing the air to flow more efficiently past the rider’s legs. The WAD (Weight Average Drag) benefit to the SES 100 PRO over the SES 6.7, with rider on board, is 5.31 watts and is primarily realized at deeper wind angles.

INNERDRIVE GOES PRO

The core of the SES Disc PRO and SES 100 PRO wheels is the PRO Hubset, which brings ENVE’s proven INNERDRIVE technology to an ultralight straight-pull hub shell on the front, and lightweight internals for the rear. Utilizing the same INNERDRIVE technology featured in the Premium Straight-Pull hubs, the PRO hub and internals receive the very hop-up kit developed for our professional teams. This includes a light-action ratchet spring for drag reduction and a 40-tooth count ratchet.

ENVE’s PRO Ceramic Bearings feature hardened stainless-steel races that won’t rust, ceramic ball carriers or bearing carriages, non-contact seals on the interior-facing bearing for drag reduction, and a semi-contact seal on the outside to keep out the debris. ENVE's PRO Ceramic Bearing solution is one that feels fast in hand and promises reliability in the long run.


USA MADE BY CHOICE

Like all of our premium wheels, we’re proud to manufacture the SES Disc PRO and SES 100 PRO wheels in Ogden, Utah, USA. At our state-of-the-art facility, everything related to rim and wheel development happens under one roof: design, R&D, testing, manufacturing, assembly, and customer support. This integration gives us unmatched visibility, control, and connectivity-ensuring every ENVE product meets the highest standards of performance and quality.

SPECIFICATIONS

DIAMETER: 700c
RIM DEPTH: 100mm Front / Full Disc Rear
INNER RIM WIDTH: 22mm
HOLE COUNT: F: 24h / R: N/A
HUB: ENVE Innerdrive PRO with ceramic bearings
SPOKES: F: Alpina Ultralight Aero R5 / R: N/A
NIPPLES: Alloy Locking
DRIVETRAIN: HG, XDR
AERO OPTIMISED TYRE WIDTH: 27-28mm (labelled)
TYRE COMPATIBILITY: Tubeless Tyres Only
WHEELSET WEIGHT: 1,620g including valves and tape 

WE'VE GOT YOUR BACK

ENVE Products are designed so that you can ride and race with confidence. As a member of the ENVE family, we’ve got your back. If something goes wrong, we are committed to do everything in our power to keep you rolling. Please click here for detailed information about ENVE's  Incidental Damage Policy and Factory Warranty